Troubleshoot Call Forwarding
Last verified
Call forwarding is set on your phone number through your carrier - Orca answers calls that your carrier forwards to it, but Orca cannot see or change your carrier's forwarding settings. This guide gets forwarding working and confirms calls actually reach your AI receptionist.
How it should work
- You enable forwarding with your carrier (forward all calls, or forward on no-answer or busy).
- A caller rings your number.
- Your carrier forwards the unanswered call to Orca.
- Your AI answers with your published greeting, handles the call, and the call appears in your Calls list.
Diagnosis tree
Work through the causes below in order. Each one matches a symptom callers or test calls commonly show.
Calls ring your own phone and never reach the AI
Forwarding may be disabled, set for a different condition, or using a ring time that does not suit your workflow.
- Check the exact condition with your carrier; codes and menus vary.
- If using ring-first forwarding, ask the carrier about the current ring time rather than changing it blindly.
- Use a second phone so you can control the no-answer, busy or unreachable condition during the test.
Callers hear ringing, then voicemail or a hang-up, with no AI greeting
Forwarding may be landing somewhere else, or your organisation setup is incomplete.
- Confirm your organisation status shows live on the dashboard rather than the "Organisation is not live" warning.
- Confirm a phone number is assigned, with no "No phone number assigned" warning on the dashboard.
- Confirm a configuration version is published: open AI config and publish any draft that is waiting, then retest.
The AI answers but with the wrong or old greeting
You have an unpublished draft. Open AI config, publish the latest draft, then retest. Unpublished changes never reach callers.
A test call reports that no server picked it up
If a test call reports that no server picked up the call within about 90 seconds, the test-call service did not answer. This is a service-side issue, not your forwarding. Wait a minute and retry; if it persists, contact us with the test-call time.
Calls reach the AI but hang up immediately with status "Failed"
The call may not have matched a working route, or the published configuration may not be usable.
- Confirm a valid configuration is published and run a fresh Test call.
- Ask support to confirm that your routing covers an ordinary caller; routing rules are not currently self-serve.
If failures continue, contact us with call IDs from Calls rather than repeatedly republishing.
Whitelist recognition or special handling is missing
First confirm the number and enabled state in Whitelist, then check the caller ID on the call record. Withheld or different numbers cannot match. A VIP marker proves recognition only. If a separately configured whitelist route is not behaving as expected, give support the call ID and the intended rule.
Carrier-side things only you can check
- Whether the intended forwarding condition is active.
- Whether conditional forwarding depends on your handset ringing, being busy or becoming unreachable.
- Whether your service supports forwarding to the assigned Orca destination type. If activation fails with a carrier error, contact the carrier.
Safety nets while you fix forwarding
If forwarding is off, calls follow your normal phone setup. While it is misconfigured, callers may reach your old voicemail or another existing destination. Preserve the previous settings so you can restore them, and ask test callers to retry only after the corrected path has been verified.
When to contact us
- Organisation status is not live or no phone number is assigned, and you cannot resolve it from the dashboard.
- Test calls fail repeatedly with a no-server pickup message.
- Calls show status Failed consistently across different callers and republishing does not help.
- You believe the phone number assignment itself is wrong.
What to include
- Your organisation or business name (never account passwords).
- Exactly what a test caller hears, step by step.
- Time of test calls (with timezone) and the call IDs from Calls or the test-call result.
- What your forwarding setting is (forward-all or no-answer) and the carrier name.
- A screenshot of any dashboard warnings (not live, no phone number assigned, unpublished draft).
Do not include caller personal details or recordings of real callers - call IDs and times are enough to investigate.
Related guides
Need a hand?
If anything here does not match what you see in the app, contact us and we will sort it out.